Degassing installations GLOBECORE UVM-4/7, UVM-10A, etc.

UVM installations are designed to remove dissolved gases, dissolved and free water from oils, as well as cleaning from mechanical impurities, and heating transformer oil poured into power transformers and other electrical devices.
Models: UVM-1/1, UVM-4/7, UVM-4/7T (on trailer), CMM-6DM, SMM-6D, UVM-6/14, UVM-10-10T(on trailer), UVM10/15, UVM-10A

The UVM-1/1 unit is designed for cleaning from mechanical impurities, water purification of insulating oils, the kinematic viscosity of which at a temperature of 50 ° C does not exceed 70 cSt. The installation can be used for heating oil-filled electrical devices with hot transformer oil, as well as for vacuuming them.

• UVM-1/1. Technical specifications.

The UVM-4/7 vacuum degassing unit operates on the principle of thermal vacuum degassing and drying of insulating oils. Filtration of the treated oil is provided by filters with a nominal filtration fineness of 5 microns.

• UVM-4/7. Technical specifications.

The UVM-6/7 mobile oil station is designed for degassing, drying, cleaning from mechanical impurities and heating transformer oil poured into power transformers with a voltage up to 1150 kV inclusive.

• UVM-6/7. Technical specifications.

The UVM-10A degassing unit is highly versatile, since it can perform several important functions: • cleaning transformer oils from mechanical impurities;
• degassing of transformer oils;
• heating of transformer oils;
• nitriding of transformer oils.

• UVM-10-10A. Technical specifications.
• UVM-12A. Technical specifications.
• UVM-10/15. Technical specifications.

The SMM-1SO cable oil degassing unit is designed to remove solid particles, gas and moisture from cable oil, to store portions of prepared cable oil and to add oil to power cables with a voltage of up to 500 kV. The device can also be used for vacuuming transformers and other equipment.

• SMM-1SO. Technical specifications.