Shipping throughout Russia and to other countries

Thermal vacuum drying and oil filtration units GLOBECORE CMM-0.6, CMM-2.2LT, etc.

The CMM-4LT mobile oil station is designed for thermal vacuum drying, filtration, purification from mechanical impurities, water purification of new and used transformer oils, as well as oils that are used in lubrication systems, sealing systems, hydraulic control systems of gas turbine and gas pumping units, gas compressors.

Oil mobile stations of the SMM-0,6 type are designed for pumping, heating, degassing and cleaning transformer oil from mechanical impurities and moisture.

The SMM-2,2LT oil mobile station is designed for complex purification (thermal vacuum drying, filtration, purification from mechanical impurities, purification from water) of transformer, turbine, hydraulic and other oils.

The mobile oil station CMM-1.0 is designed for cleaning electrical insulating oils from mechanical impurities and water, the viscosity of which at a temperature of 50 ° C does not exceed 70 cSt.

The SMM-1LT unit is designed for thermal vacuum drying and filtration of industrial oils used in lubrication systems, seals, hydraulic control of gas turbine and gas pumping units, gas engine compressors, transformers. In addition to oil purification, CMM-1LT can be used for heating and drying oil-filled electrical devices.

The CMM-1H unit is designed for drying, filtration of transformer mineral oil. The process is based on the application of heat and vacuum. The oil is heated and pumped into a vacuum chamber. The low pressure in the chamber causes the water in the oil to boil and evaporate. The water vapor is removed by the exhaust of the vacuum pump.

The CMM-F and CFU-F units are designed for cleaning insulating and lubricating oils from water and mechanical impurities. A feature of these installations is the use of coagulation filters, which are subject to repeated restoration. When passing oil through the filter, water accumulates on its surface and flows into a special collector.
Models: CFU0.8F, CFU0.5F, SMM-4F.

CFU units are designed for cleaning insulating and lubricating oils from mechanical impurities. CFU units are used in the installation and repair of power transformers, as well as for flushing and refueling hydraulic systems.
Models: CFU-1.7, CFU-4, CFU-6.

 

All GLOBECORE products

The group «New Technologies» offers products from the plant GLOBECORE: degassing, regeneration, zeolite installations, for transformers, for turbine oil, for cable oil, for emulsions, oil stations, vacuum units
  • Transformer oil regeneration plants GLOBECORE
    Transformer oil regeneration plants
    CMM-6R, CMM-12R, UVR, etc.
  • Thermal vacuum drying and oil filtration units GLOBECORE
    Thermal vacuum drying and oil filtration units
    CMM-0.6, CMM-2.2LT, etc.
  • Oil drying and insulation installations GLOBECORE
    Oil drying and insulation installations
    CMM-SSD, Mojave Heat 4, etc.
  • Degassing installations GLOBECORE
    Degassing installations
    UVM-4/7, UVM-10A, etc.
  • Transformer oil testing devices GLOBECORE
    Transformer oil testing devices
    TOR-1, TOR-80, etc.
  • Vacuum Drying Ovens GLOBECORE
    Vacuum Drying Ovens
    UVS-6C, UVS-4, etc.
  • Oil drying plants with zeolite GLOBECORE
    Oil drying plants with zeolite
    MCU-4.3, MCU-7, etc.
  • Hydraulic oil filtration plants GLOBECORE
    Hydraulic oil filtration plants
    CFU-0.8C, CFU-4C, etc.
  • Complex cleaning installations GLOBECORE
    Complex cleaning installations
    CMM-4T, CMM-1CO, etc.
  • Installations for the production of bitumen emulsions GLOBECORE
    Installations for the production of bitumen emulsions
    UVB-1, UVB-L, etc.
  • Bitumen modification installations GLOBECORE
    Bitumen modification installations
    UVB-2, etc.
  • Transformer maintenance equipment GLOBECORE
    Transformer maintenance equipment
    UVD-4, PPM-18, etc.
  • Maintenance of wind turbines GLOBECORE
    Maintenance of wind turbines
    CMM-G, CMM-GL, etc.
  • Colloidal mills GLOBECORE
    Colloidal mills
    CLM-100.1, etc.
  • Electromagnetic mills GLOBECORE
    Electromagnetic mills
    AVS-100, AVSP-100, etc.
  • Storage tanks and reservoirs GLOBECORE
    Storage tanks and reservoirs
    for bitumen, water, etc.

About GLOBECORE

GLOBECORE (Kursk) is engaged in the production of equipment used for the manufacture of bituminous emulsions, the regeneration and purification of transformer oil, fuel mixing, the manufacture of biodiesel, and the emulsification of almost all types of products.

  • realization

    The company's installations are successfully operated in more than seventy countries around the world. The company's dealer network is set up so that the sale of equipment is convenient for both the manufacturer and the buyer.

  • ADVANCED PRODUCTION

    The technical equipment of the plant meets international standards: plasma robotic cutting, automated welding machine and modern machines with software.

  • QUALITY CONTROL

    Every year, the qualified personnel of the enterprise produces hundreds of units of modern equipment, which passes mandatory testing at the test site of the plant.

Information Board GLOBECORE

Learn more about our products GLOBECORE.
  • GLOBECORE Product Catalog поставщика GLOBECORE
    GLOBECORE Product Catalog
  • Product Catalog (eng) из каталога GLOBECORE
    Product Catalog (eng)

NEW TECHNOLOGIES GROUP

For sales and support please contact

Representative offices in front/city.where_countries.Russia, front/city.where_countries.Armenia, front/city.where_countries.Belarus, front/city.where_countries.Kazakhstan, front/city.where_countries.Kyrgyzstan, front/city.where_countries.Tajikistan, front/city.where_countries.Uzbekistan and other countries of the world. Delivery to any city.

Send your question now: